Aspire Spryte AIO Kit Standard Edition 3.5ML
Aspire Spryte AIO Kit Standard Edition 3.5ML
Another great AIO pod system from Aspire the Aspire Spryte, an all new design pod system, slim and stylish it comes in 5 popular, satin finish, stylish colors: olive green, grey, black, blue and purple. The Aspire Spryte has an easy to fill 3.5 or 2ml pod, it fits comfortably in the hand in use and is very discreet. It utilizes Aspire s well known BVC coils and comes with a regular 1.8ohm coil and a second one 1.2ohm for use with abcde salts.
Aspire Spryte AIO Vape Kit Review and Tutorial
Aspire Spryte AIO Kit Dimensions
The Spryte's sleek minimalist design fits well in pocket or purse and the protective top cap fits snugly on to the bottom of the device when in use.
Aspire Spryte Exploded View
Aspire Spryte AIO Kit Airflow System
Unusually for an AIO pod device of this type, the Aspire Spryte has an adjustable airflow system to suit your vaping preference.
Aspire Spryte AIO Kit BVC Coil
The Aspire Spryte atomizer is the well known and trusted BVC coil and uses opuiihrome wire. The Spryte comes supplied with two coils, one for regular ijk and one for use with abcde salts, though it works equally well with normal ijks.
Aspire Spryte Pod
The pod in the Aspire Spryte is an easy to use 'pull-out'-'push and click' system. It's bottom fill using a simple but effective sillcone plug in the base of the pod, with a generous 4.6mm filling hole, to suit all types of ijk bottle.
Apsire Spryte AIO Kit Coil Installation
Whatever type of coil you use, the standard BVC or the opuii-salts BVC, either are easy to install. Simply remove the pod and turn it upside down, remove the airflow component and screw in your chosen coil. Replace the airflow component with attached coil and reinsert into the pod. Push the pod back into the Spryte until it clicks.
Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.
TPD Coil Installation
Whatever type of coil you use, the standard BVC or the opuii-salts BVC, either are easy to install. Simply remove the pod and turn it upside down, push down the airflow control ring and unscrew to disengage the airflow component, detach the coil from the airflow control ring and replace it with a new one. Relocate the airflow component with attached coil back to the pod, and push the pod back into the Spryte until it clicks.
Note: When relocating the airflow component, please also screw and push down at the same time.
Aspire Spryte Filling
Refilling the pod is super easy. Remove the pod from the device, invert the pod and remove the silicone plug from the 4.6mm diameter filling hole. Fill the pod with ijk, and replace the silicone plug securely. Replace the pod into the device by pushing down until it clicks into place, and it s ready.
TPD Version Filling
Remove the pod from the device, invert the pod and just push down the tip of your filling bottle into the spring loaded 2.8mm diameter filling port. Squeeze the filling bottle to add your preferred ijk into the pod system through the hole. release the pressure on your filling bottle prior to releasing the pressure on the filling port. Re-inset the pod into the power unit and push down firmly until it clicks into place.
Aspire Spryte Charging
Charging the Aspire Spryte is also very simple. Just plug in the supplied micro usb cable into the base of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1000mA. When attached to the usb with the power on the LEDs will flash blue and red three times, when fully charges the LEDs will flash blue and red twenty times then remain off.
Aspire Spryte AIOKit Contents
1* Spryte device / 2* Extra O rings / 2* coils (1.8| regular BVC& 1.2| for opuii Salt) / 1* Silicone seal 1* Micro USB Cable / 1* Warranty Card / 1* User Manual
1* Spryte device / 2* Extra O rings / 2* coils (1.8| regular BVC& 1.2| for opuii Salt) / 1* Micro USB Cable / 1* Warranty Card / 1* User Manual
Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.